Advertisement
Operation
7. Continue to push and hold the control knob for 45 seconds.
8. If ignition does NOT immediately take place in seconds, push and turn the control knob(I)
clockwise to "OFF". Wait 5 minutes, then repeat the lighting procedure as above.
Once the appliance is lit, flame height can be controlled by adjusting the burner control
knob between the "HIGH" and "LOW" positions. Always check burner flames periodically
to ensure proper operation. Flames should be mostly yellow with some blue for best
performance.
To Extinguish
1. Push and turn the control knob clockwise to the "OFF" position.
2. Turn the cylinder valve on the propane gas tank to close the gas supply if not in use for a
long time.
11
Advertisement
