Philips EasyKey 6000 Series User Manual page 8

Adjustable rear lever instructions
Loosen the screw on the
1
lever and rotate the lever
180° to the right position.
Attention
1. Choose a proper installation kit base on the door thickness. The default tool kit
applies to a door thickness of 30-60mm. Please consult the local distributor for other
door thicknesses.
2. If the length of the square shaft is too long, please cut it to a proper length according
to the door thickness.
Step 3| Adjustable latch instructions
Adjust the latch direction to adapt to the door swing direction: if the slant of the
latch is towards the outside door, then the door is inswing; if the slant of the latch
is towards the inside door, then the door is outswing.
Push the latch in and rotate it to 180
2
degrees
Release the latch and
3
let it rebound
6
Latch
Secure the screw
2
on the lever.
Press and hold the arrow
1
position with a tool