Milton & Goose Play Kitchen Hood Instructions

ADULT ASSEMBLY REQUIRED

!
WARNING:
Product contains small parts with potentially hazardous
sharp points and sharp edges in the unassembled state.
Keep unassembled parts away from children.
!
WARNING:
This toy has been rigorously tested to meet all toy tipping
safety standards; however, this toy is not meant to be
climbed on. Serious injury can occur with improper use.
• Do not allow children to climb on or
hang from this product
• Place product on flat, level surface only
• Do not place heavy objects on top of this product
• Keep back of this product against a flat wall
• Follow age guidelines for this product

Assembly Instructions

1. Upon opening package, please inspect contents to
make sure all parts and components are accounted for.
2. Place contents on padded or carpeted surface to avoid
damage.
3. Please read assembly instructions carefully.

Use and Care

Use on level surfaces only, and routinely check hardware
and tighten as necessary. Failure to maintain your new
product may result in unsafe conditions for children.
We build our toys with years of future play in mind, so to
ensure a long lifespan for your product, surface clean only
with a dry soft cloth. To clean small stains, use a slightly
damp cloth and if necessary, a mild detergent. Wipe all
spills immediately and avoid using any abrasive cleaning
agents or scrubs, including ammonia or alcohol based
formulas.
For more for information on how to care for your new toy,
please visit www.miltonandgoose.com.
Contact us at: support@miltonandgoose.com
Small Parts
Tipping Hazard
Play Kitchen Hood
Play Kitchen purchased separately

Tools Required

Philips-head screwdriver

Parts

1 hood (A)
1 backboard (B)
12 11/2" screws (C)
3 pegs (D)
A
B
C
Qty 12
Qty 3
D
www.miltonandgoose.com
8/14/2019