Table of Contents
Advertisement
SPI-14/18-2150 Manual.qxd
Installation
1
.
Connect the V-OUT and H-OUT to the appropriate polarity of the satellite IF distribution system.
2.
Connect the PWR TO H-LNB and PWR TO V-LNB to the LNB.
3.
Verify the voltage selector switch is in the correct position 13/14~17/18 for DBS operation or 17/18~17/18 for C/ku band operation.
4.
Insert the 3.5mm power adaptor connector into the SPI-14/18-2150. Plug the AC wall adaptor into a polarized wall receptacle.
10/20/03
9:34 AM
Page 7
SPI-14/18-2150
Ph: 800-421-6511
Installation
www.picomacom.com
Procedure
7
Rev. 06/03
Advertisement
Table of Contents
