Advertisement
Table of Contents
Congratulations!
After assembly and finishing, your
time, some
very important steps must be taken to ensure a very long and worry-free service life. After that, it will provide
endless hours of fun
and great food to share with your family and friends.
Important!
•
Read this manual thoroughly and keep it for future reference.
•
Do not allow children and pets near the oven during assembly and finishing, as well as during operation.
•
After finishing the oven, you must wait a minimum of 15 days before igniting any fire for the first time. This
period is necessary to
safely ensure the oven and the finishing materials are properly dry.
Attention! Very important information! After the oven is finished, there must be a minimum 15-day curing time
before starting any fire in the oven. Failure to do so may damage the oven and will result in loss of the warranty.
After the waiting period is over, you should start the process of heat-conditioning your
Oven. This process will prepare the oven for regular use. It will cause the various parts to accommodate
themselves so as to avoid tensions and
cracks. This is accomplished by lighting a series of progressively larger fires on every consecutive day until the
maximum possible fire is achieved.
Please follow these instructions closely:
•
On day 1, light a small metal container with a pint of alcohol in the center of the fire chamber and let it burn
completely.
•
On day 2, light a small metal container with a quarter gallon of alcohol in the center of the fire chamber and let it
burn completely.
•
On day 3, light a small fire with wood in the center of the fire chamber and let it burn completely.
•
On day 4, light a larger fire with wood in the center of the fire chamber and feed it slowly for two hours, then let
it die naturally.
Leave the embers to cool down before cleaning.
•
On day 5, light a still larger fire with wood in the center of the fire chamber and feed it with some 20 pounds of
wood during one and a half hours, then let it die naturally. Leave the embers to cool down before removing them.
•
Your oven is now ready to use. Enjoy!
Important!
Cuore1200 Wood-Fired Oven
Model 1200 Operation Manual
is now ready. However, before using it for the first
Heat-conditioning your oven
Cuore1200 Wood-Fired
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cuore 1200
Summary of Contents for Cuore 1200
- Page 1 Model 1200 Operation Manual Congratulations! After assembly and finishing, your Cuore1200 Wood-Fired Oven is now ready. However, before using it for the first time, some very important steps must be taken to ensure a very long and worry-free service life. After that, it will provide endless hours of fun and great food to share with your family and friends.
- Page 2 • Don´t skip days, follow this process for five days in a row. • If your oven is left unused for 6 months or more, repeat the process starting from day 4. • Never close the door if there´s fire inside the oven. •...
- Page 3 The thermometer Your Cuore 1200 Wood-Fired Oven comes with a bimetallic analog thermometer. It should be placed in the appropriate hole above the oven mouth. For proper operation, the thermometer stem should not protrude inside the fire chamber, because direct exposure of the stem to the flames will quickly ruin the thermometer.
- Page 4 Cuore Ovens shall not be responsible, in no event, for any incidental or consequential damages caused by defects in its products, whether such damage occurs or is discovered before or after replacement or repair, and whether or not such damage is caused by Cuore Oven’s...
Need help?
Do you have a question about the 1200 and is the answer not in the manual?
Questions and answers