Table of Contents
Advertisement
Assembly
4.
Slide the mower under the chassis from the right
side and align attachment lift with slot in center
lever bar (Fig. 4).
5.
Straighten the front wheels, turn Dial-A-Height
knob counterclockwise, all the way, and lower
the attachment lift lever to the mounting
position; refer to tractor Operator's Manual.
6.
Place attachment lift pin into slot in center lever
bar and secure with 3/4" (19 mm) washer and
hairpin cotter (Fig. 4).
Figure 4
1. Attachment lift
2. Slot-center level bar
6
1
2
3
4
m–2824
3. Washer
4. Hair pin cotter
7.
Rotate front mounting shaft so fork faces up and
align so spacers are between mid-mount hitch
plates (Fig. 5).
8.
Lift mower with attachment lift and guide fork
to capture hitch rod (Fig. 5). Close mid-mount
hitch lock handle.
5
4
Figure 5
1. Front mounting shaft
2. Fork
3. Spacer
9.
Remove the two wing nuts and belt cover from
the tractor (Fig. 6).
2
Figure 6
6. Belt cover
1
2
3
3
m–2825
4. Mid-mount hitch plate
5. Hitch rod
2
1
m–2534
7. Wing nut
Advertisement
Table of Contents
