Sealey 3000ESLE Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREfULLY. NOTE THE SAfE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE fOR THE PURPOSE fOR WHICH IT IS INTENDED. fAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAfE fOR fUTURE USE.
1. SAfETY
Ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use
3
genuine parts only. The use of unapproved parts may be dangerous and will invalidate the warranty.
Locate the jack in a suitable, well lit working area.
3
Keep working area clean and tidy and free from unrelated materials.
3
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
3
Place wedges under wheels of a vehicle, but ensure wheels of jack can move freely.
3
Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or "PARK" if an automatic).
3
Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for vehicle tilting.
3
Ensure there are no passengers in the vehicle.
3
Ensure all non-essential persons keep a safe distance whilst the jack is in use.
3
Only place jack under those lifting points recommended by vehicle manufacturer (see vehicle hand book).
3
Check the lifting point is stable and centred on the jack saddle.
3
Ensure the jack wheels are free to move and that there are no obstructions.
3
Use suitable capacity axle stands under the vehicle before proceeding with any task.
3
Ensure there are no persons or obstructions beneath the vehicle before lowering.
3
Use a qualified person to maintain or repair the jack's hydraulic system.
3
DANGER: Use the jack for lifting only.
p
DO NOT use for supporting the lifted load.
7
DO NOT operate the jack if damaged.
7
DO NOT allow untrained persons to operate the jack.
7
DO NOT exceed the rated capacity of the jack.
7
DO NOT allow the vehicle or the jack to move while supported by the jack.
7
DO NOT jack the vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
7
DO NOT work under the vehicle until the axle stands have been correctly positioned.
7
DO NOT use the jack for purposes other than which it is intended.
7
DO NOT top up the hydraulic system with brake fluid. Use hydraulic jack oil only.
7
DO NOT adjust the safety overload valve.
7
When not in use store the jack, fully lowered, handle removed in a safe, dry, childproof area.
7
2. INTRODUCTION
European style trolley jacks feature a low profile lifting arm and extended access platform for use on low slung vehicles. Lift-and-twist 'Dead
Man' lowering mechanism operates via 'D' shaped handle and prevents accidental lowering; lowers rapidly when no load is attached and pro-
vides smooth, slow, controlled lowering with a load. Nylon wheels fitted which are quiet in operation and help prevent damage to garage floors.
Foot pedal for quick approach of the lifting saddle to the vehicle. Also includes removable rubber saddle pad and built-in tool tray for fasteners
and tools.
3. SPECIfICATION
Model No: 2000ESLE
Capacity:................................. 2tonne
Min. saddle height:.................. 75mm
Max. saddle height:................. 520mm
Chassis height:....................... 135mm
Length:.................................... 960mm
Weight:.................................... 42.0kg
fig.1
© Jack Sealey Limited
INSTRUCTIONS FOR:
TROLLEY JACK 2TONNE/3TONNE
EUROPEAN STYLE LOW ENTRY
MODEL No's :
Model No: 3000ESLE
Capacity:................................. 3tonne
Min. saddle height:.................. 100mm
Max. saddle height:................. 570mm
Chassis height:....................... 185mm
Length:.................................... 1070mm
Weight:.................................... 50.3kg
Lift and rotate clockwise
to lower elevated jack.
Sweep backwards and
forwards to elevate jack
Original Language Version
2000ESLE & 3000ESL
Model No: 2000ESLE 3000ESLE
A
B
C
D
E
F
G
H
E
75 100
445 470
135 185
520 570
960 1070
1852 1980
375 375
263 275
2000ESLE/3000ESLE Issue: 1 - 10/04/14