First Alert SCO500NVA Specification Sheet

SMOKE & CARBON MONOXIDE ALARM
WIRELESS INTERCONNECT
Reliable and secure radio frequency communication
between alarms. 915 MHz frequency with 65,000 security
codes and 3 channel frequency hopping.
TALKING ALARM WITH LOCATION
When programmed, a voice will tell you the location of unit
if smoke is detected.
MESH NETWORK COMMUNICATION
2-way communication format that sends, receives and
re-sends the alarm signals providing a more reliable network.
PHOTOELECTRIC
Photoelectric technology is generally more sensitive at
detecting large particles, which tend to be produced in
greater amounts by smoldering fires.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT
Locks alarm to mounting bracket to prevent removal of
battery and/or alarm. Perfect for apartment, dormitory or
hotel applications.
First Alert Model SCO500NVA (Cat.1039823) is a single station
smoke alarm specifically designed for residential and institutional
applications including sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily dwellings as defined in standard
NFPA 101. Model SCO500NVA has been fully tested and complies
with, ULC S531, CSA 6.19-01, NFPA 72, NFPA 720 and NFPA 101
and other agencies that model their codes after the above agencies.
It meets building codes where battery operated smoke alarms with
wireless interconnect, voice with location and silence features are
required and with model building codes published by the ICC.
First Alert SCO500NVA is a state of the art wireless talking smoke
alarm designed to provide early warning of a fire. It features a fully
insect screened Photoelectric smoke sensing chamber, an 85dB horn,
a supervised 3V (2 AA batteries) power supply, a full function test
switch and a silence feature. This smoke alarm interconnects via
wireless communication on a reliable and secure radio frequency
communication of 915 MHz frequency with 65,000 security codes
and 3 channel frequency hopping. There is a choice of 11 pre-
programmed locations where a voice will announce the location
and danger detected. When interconnected with other First Alert
Wireless Interconnect alarms it will also announce the danger and
location detected of that alarm too. It operates on a Mesh Network;
a two-way communication format that sends, receives and re-sends
the alarm signals providing a more reliable network. It also features
tamper resistant locking pins that lock alarm to the mounting bracket
and battery drawer to prevent removal of battery or alarm. Perfect for
apartment, dormitory or hotel applications. Designed for wall or ceiling
mounting. Includes mounting anchors and screws.
Model SCO500NVA
Model SCO500NVA
Cat. 1039823