Copyright 2023 Lloyd’s Material Supply Company, Inc. All rights reserved. Duplication without written consent is strictly prohibited. Due to continuous improvement programs, all models operation, and /or specifications are subject to change without prior notice. LTR5000.2023, CAL SALT REV. D 5/24/2023 CONTACT INFORMATION For customer service, please contact your authorized dealer im-...
Page 6
1900-2000 ppm 1900-2000 ppm Salt level: 1900 - 2000 ppm: Salt level: 1900 - 2000 ppm:...
Page 7
These are the requirements for the Cal Salt system for the optimal comfort and efficacy of These are the requirements for the Cal Salt system for the optimal comfort and efficacy of the filtration system. The preferred salinity level is 1900 – 2000 ppm. All references in the the filtration system.
Page 13
Symptom on PowerSupply Display Possible Causes Solution no display 1 - power outage Make sure there is power to the unit. lights 2 - power supply failure Need to replace the power supply. No action is needed: “_ _” unit in rest mode lights The two dashes means end of the time cycle.
Lloyd’s Material Supply Company, Inc. or its designated service must be performed by Lloyd’s Material Supply Company, Inc. or its designated representative using authorized Cal Spas parts. No agent, dealer, distributor, service representative using authorized Cal Spas parts. No agent, dealer, distributor, service...
Page 16
CONTACT INFORMATION For customer service, please contact your authorized dealer immediately. If you need additional information and/or assistance, contact: Lloyd’s Material Supply Company, Inc. Customer Service Department 1462 East Ninth Street Pomona, CA 91766. Toll Free: 1-800-225-7727 Fax: 1-909-629-3890 LTR5000.2023 CAL SALT, REV. D 5/24/2023...
Need help?
Do you have a question about the CalSalt Filtration and is the answer not in the manual?
Questions and answers