LG NA9340 Owner's Manual page 22

22 Connecting
Notes on Network Connection
y Many network connection problems during set
up can often be fixed by re-setting the router.
After connecting the speaker to the home
network, quickly power off and/or disconnect
the power cable of the home network router or
cable modem. Then power on and/or connect
the power cable again.
y Our company is not responsible for any
2
malfunction of the speaker and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection or other
connected equipment.
y The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
y Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
y If the speaker fails to connect to your network
or its network connection operates abnormally,
place the speaker closer to your router and try
again.
y Depending on your home network environment
and the performance of wireless router, it may
not work well to connect the speaker to your
wireless router.
y You cannot connect the speaker to wireless
router which has hidden SSID.
y The connection you've made may be
disconnected if you select other application or
change the setting of the connected speaker via
"Music Flow Player" app. In such a case, please
check the connection status.
y Even After connection of Music Flow Player app,
music may be output from your smart device. In
this case, select the connected speaker on the
playback screen.
y Depending on the speed of your network,
playback of online contents may not work well.
y Wireless signal interference may lead to
disconnection of network or stopping playback.
y You need to turn the speaker's power off and on
again if you restart the router.
y You need to perform a factory set and setup the
network connection for speaker, if you install
new router.
y If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.