Table of Contents
Advertisement
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports Plug & Play*.
y
y
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
NOTE
When using a D-Sub signal input cable
y
y
connector for Macintosh
Mac adapter
y
y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
USING THE MONITOR SET
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
NOTE
If you use HDMI PC, it can cause compatibility
y
y
problem.
CAUTION
Connect the signal input cable and
y
y
tighten it by turning the screws
clockwise.
Do not press the screen with your finger for
y
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
When you want to use two PC in our Monitor,
y
y
please connect the signal cable(D-SUB/
HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
y
y
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
y
y
on the screen. This is normal.
11
Advertisement
Table of Contents
