Operating - Medisana LT 460 Instructions Manual

Therapy light
Hide thumbs Also See for LT 460:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16

3 Operating

GB
3.1
Commis-
sioning
3.2
Application
18
Remove the stand
Plug the stand
Either use one of the holes
Or plug the stand as it is shown in the picture (see „Device and
controls") to put up the device horizontally.
Place the device approx. 20 to 30 cm away from your eyes. The
light should reach your face sideways.
Place the device on a stable, level surface (e.g. on a table). Make
sure that the device will not drop or fall down.
Connect the power plug to the socket for power plug
back of the device and to a mains socket.
NOTES
Set up the device in a place near a mains socket.
1. To switch on the device, press the On-/Off-button
lamps will emit a light with high intensity.
2. Press the On-/Off-button
light - low intensity,
3. Press the On-/Off-button
As long as you enjoy the soothing light of the device, you may read
a book, phone or do your work. Always keep in mind to keep the
correct distance between the device and your eyes (= 20 to 30 cm).
Recommended use regarding the duration of application:
High intensity
Distance
30 cm
20 cm
5
from the stand storage cavity
5
in one of the holes on the back of the device.
3
to put up the device vertically.
2
again to lower the intensity of the
2
again to switch off the device.
Application duration
approx. 2 hours
approx. 1 hour
4
.
6
on the
2
once. The
Application area
400 cm²
370 cm²

Advertisement

Table of Contents
loading

This manual is also suitable for:

45220

Table of Contents