Electrolux EFB4204A User Manual page 14

14 www.electrolux.com
INSTALLATION
Assemble bar handle to door
Position the handle over handle mounts.
Step 1.
Tighten the set screw on the top
pedestal in clockwise direction to
secure the handle onto the door.
Step 2.
Tighten the set screw on the
middle pedestal in clockwise
direction to secure the handle
onto the door.
Step 3.
Tighten the set screw on the
bottom pedestal in clockwise
direction to secure the handle
onto the door.
REMOVING PROTECTIVE FILM
WARNING
To protect your fridge door it is ESSENTIAL that the
factory fitted protective film around the handle
mounting points is not removed until after the
handles are installed.
Step 1.
Place and position
handle on door.
Step 2.
Secure the handle in
place, by LIGHTLY
tightening the screw
using the LONG END of
the provided Allen key.
Please take care not to
scratch the surface of the
door with the end of
Allen key.
Step 3.
Gently remove upper
protective film A.
Step 4.
Lock the handle in place
by FIRMLY tightening the
screw using the SHORT
END of the provided Allen
key.
Step 5.
Gently remove lower
protective film B. Repeat
step 1-5 for all remaining
handles.