Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for FAMITEC AQ3
- Page 1 Wet and Dry Vacuum Cleaner User Manual v1.0...
- Page 2 These instructions are also available in our website www.famitec.com The appliance can be intended for use by persons (including children aged 8 years and above) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have...
-
Page 3: Table Of Contents
TABLE OF CONTENTS PRODUCT DESCRIPTION ––– 1.1 Inside the Box Product Description 1.1 Inside the Box 1.2 Parts Description 1.2.1 Wet and Dry Vacuum Cleaner 1.2.2 Charging and Cleaning Base Station 1.2.3 Clean and Dirty Water Tank Use of Product 2.1 Operation Precautions 2.2 First Time Installation 2.3 First Time Battery Charging... -
Page 4: Product Description
PRODUCT DESCRIPTION PRODUCT DESCRIPTION 1.2 Parts Description... -
Page 5: Use Of Product
USE OF PRODUCT USE OF PRODUCT 2.1 Operation Precautions 2.2 First Time Installation When the main unit is stand upward, it will automatically shut down if there is no operation within Install the base station 20 seconds. Place the base station against the wall and connect the power cord. ... -
Page 6: First Time Battery Charging
USE OF PRODUCT USE OF PRODUCT 2.3 First Time Battery Charging 2.4 User Interface After the base station is powered on, place the main unit correctly on the base station, and the main unit will automatically charge immediately. The Battery charging indictor is lighted up and flashes, and it is fully charged once 3 green LED lights are all lighted up. -
Page 7: Operation
USE OF PRODUCT USE OF PRODUCT Icon Function / Indication 3 green LED lights lighted up = Full 2 green LED lights lighted up = ~ 67% 1 green LED light lighted up = ~ 33 % 1 red LED light lighted up = ~ 20% (place the main unit to base station for battery charging) 1 red LED light flashing = Low Battery. -
Page 8: Removing And Filling Of Clean Water Tank
USE OF PRODUCT USE OF PRODUCT 2.6 Removing and Filling of Clean Water Tank When the main unit is on the base station, short press the " " button on the handle, the self-clean mode indicator Disassembly: is light up, the main unit will enter the self-clean process and start cleaning the roller brush. -
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE 3.1 Cleaning of Dirty Water Tank 3.3 Deep Cleaning of Dirty Water Tank Simple cleaning: Use tap water to rinse the dirty water tank and the wet and dry separator on the top cover until it is clean. You can use the detergent When the water level of the dirty water tank exceeds the and cleaning brush to clean the dirty water tank, the wet and dry ‘Water Level’... -
Page 10: Cleaning Of Clean Water Tank Filter
CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE 3.4 Cleaning of Clean Water Tank Filter 3.6 Cleaning of appliance Before or after using the appliance, please make sure that the appliance is turned off, and then use a dry cloth or paper towel to clean the dust adhering to the body. Warning Do not rinse the main unit directly with water... -
Page 11: Faq And Trouble Shooting
FAQ AND TROUBLE SHOOTING Problems Possible cause Solutions Product Name AQ3 Wet & Dry Vacuum Cleaner Charging after use and ensure that the Running out of battery Main Unit Dimension 260 x 260 x 1090mm appliance is full charged before use Main Unit Weight ~3.8Kgs... -
Page 12: Warranty Services
WARRANTY SERVICES Famitec provide the product warranty services to the original purchaser of this product that this product will be free from defects in material and workmanship under normal use and service for 12 months from date of purchase. We will, at its option, repair or replace with a new or refurbished product. We reserve the right, before having any obligation under this limited warranty, to inspect the product, and all costs of shipping the product for inspection and warranty service shall be borne solely by the purchaser.