grandlux BRL-3052 Manual

USING YOUR ELECTRIC GRINDER
Before First Use
Clean the Cover, Bowl, and Blade as described in the "Care and
Maintenance" section.
•
Make sure the Coffee Grinder is unplugged.
•
Remove the Cover by lifting it up. Add up to 2.5 oz. of coffee beans to
the Bowl.
•
Close the Cover and plug the Power Cord into a standard 230-volt AC
electrical outlet.
•
To operate, press and hold the ON/OFF Button. Release the ON/OFF
Button to stop grinding.
•
Unplug the Power Cord from the electrical outlet and remove the Cover.
Remove the coffee grounds from the Coffee Grinder.
NOTICE
Do not operate for more than 30 seconds at a time. After 30 seconds
of continuous operation, allow the unit to rest for 30 seconds
NOTE
The Coffee Grinder will not operate unless the Cover is in place.
WARNING
To reduce the risk of fire, electric shock, or serious personal injury:
▪
To protect against risk of electrical shock DO NOT put the unit in
water or any other liquid nor use the unit near any water or liquid
▪
NOT to be used by children
▪
Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
▪
Avoid contacting moving parts.
▪
DO NOT operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Return the appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical
adjustment.
▪
DO NOT use any attachments as it may cause fire, electric shock or
injury.
▪
Check inside the bowl for any presence of foreign objects before
each use
Electric Coffee
Grinder
Model: BRL-3052
FUNCTION DIAGRAM
A. ON/OFF BUTTON
B. COVER
C. BOWL
D. BLADE
E. BASE
F. PLUG
G. POWER PLUG
Specification
Capacity Dimension Voltage Frequency Wattage
70 gram 4x4x7.6in
Package Contents
1 x Electric Grinder
1 x Transparent Safety Lid
1 x Brush
Care And Maintenance
▪ Always make sure the Coffee Grinder is unplugged from the electrical
outlet before cleaning it.
▪ This product was permanently lubricated at the factory before shipping
and will not require further lubrication for the life of the product.
Additional lubrication of motor parts could increase the risk of a fire
hazard.
NOTICE
Do not use harsh or abrasive cleaners or pads (metal scouring pads) on
the Coffee Grinder.
▪
Hand wash the Cover with soapy water or place it on the upper rack
of a dishwasher for cleaning.
▪
Clean the Bowl and Blade with a clean, wet, soapy sponge. Rinse the
Bowl and Blade, but do not immerse the Base in water. Gently pat the
Bowl and Base dry using a clean, dry cloth.
CAUTION: Clean the Bowl and Blade carefully to avoid personal
injury.
▪
Wipe the Base with a damp cloth to clean.
▪
Replace the Cover once all parts are dry.
▪
Store in a cool, dry place
150W
60Hz
230v