Indicators
Indicator
Name
U.S.
Parking Brake
and Brake
Canada
System Indicator
(Red)
(Red)
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
76
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
w
(
*1
, then goes off if the parking
brake has been released.
Comes on when the parking brake
●
is applied, and goes off when it is
released.
Comes on when the brake fluid
●
level is low.
Comes on if there is a problem
●
with the brake system.
The beeper sounds and the
●
indicator comes on if you drive
with the parking brake not fully
released.
Comes on for about 15 seconds
●
when you pull the electric parking
brake switch while the ignition
switch is in LOCK
*1
.
(
0
Stays on for about 15 seconds
●
when you turn the ignition switch
to LOCK
(
0
*1
while the electric
parking brake is set.
Explanation
Comes on while driving - Make sure
●
the parking brake is released. Check the
brake fluid level.
2 What to do when the indicator
comes on P. 603
Comes on along with the ABS
●
indicator - Have your vehicle checked by
a dealer.
2 If the Brake System Indicator (Red)
Comes On or Blinks P. 603
Blinks and the parking brake and
●
brake system indicator (amber) comes
on at the same time - There is a
problem with the electric parking brake
system. The parking brake may not be
set.
Avoid using the parking brake and have
your vehicle checked by a dealer
immediately.
2 If the Brake System Indicator (Red)
Comes On or Blinks at the Same
Time When the Brake System
Indicator (Amber) Comes On P. 604
Message
*