System Menu - Samsung SyncMaster 9 Series User Manual

Basic Features

System Menu

Setting the Time
¦
O
MENUm → System → Time → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Date and Time.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Date and Time directly by
pressing the number buttons on the re mote
control.
Time Zone: Select your time zone.
✎
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
O
MENUm → System → Time → Sleep Timer →
ENTERE
t
■ Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the Sleep Timer, select Off.
36
English
: Automatically shuts off the TV
Setting the On / Off Timer
O
MENUm → System → Time → On Timer or Off
Timer → ENTERE
■ On Timer 1 / On Timer 2 / On Timer 3: Three different
on timer settings can be made. You must set the clock
first.
On Timer 1
Setup
Sun Mon Tue
Time
Volume
Source
Antenna
Channel
• The displayed image may differ depending on the model.
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
convenience. If you select Manual, you can set up the
day you want to activate the timer.
✎
The mark indicates the day is selected.
c
Time: Set the hour, minute, and am/pm.
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Music / Photo (when the Source is set to USB):
Select a folder in the USB device containing music
or photo files to be played when the TV is turned on
automatically.
✎
NOTE
x
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
x
When there is only one photo file in the USB, the
Slide Show will not play.
x
If a folder name is too long, the folder cannot be
selected.
x
Each USB you use is assigned its own folder. When
using more than one of the same type of USB, make
sure the folders assigned to each USB have different
names.
x
It is recommended that you use a USB memory stick
and a multi card reader when using On Timer. The
On Timer function may not work with USB devices
with a built-in battery, MP3 players, or PMPs made
by some manufacturers because these devices take
Off
Wed Thu Fri Sat
12:00 am
20
TV
Cable
3
Close