Using The Rs 5000; Switching The Wireless Headphone System On - Sennheiser 506824 Instruction Manual

Using the RS 5000

Switching the wireless headphone system on

WARNING
Vol +
Danger of hearing damage due to high volumes!
This stethoset receiver allows you to set higher volumes than con-
ventional devices. Constant high-volume use can cause hearing
Vol -
damage.
1
VOLUME
2
Before putting the stethoset receiver on, set the volume on the
receiver to a low level.
Do not expose yourself to high volume levels for extended peri-
ods of time.
Use a hearing profile (see page 24) that improves especially
speech intelligibility without the need for a high volume.
Switch your audio source on.
If the transmitter is connected to the headphone socket (see
page 13) of your TV/audio source, adjust the volume of the
headphone socket on your TV/audio source to at least a medium
level.
Take the stethoset receiver out of the transmitter's charging
compartment and pull the ear bows apart so that you can put the
receiver on.
The stethoset receiver automatically switches on when you pull
the ear bows apart. The
transmitter automatically switches on and the
tus LED lights up white or blue. The audio transmission starts.
The remaining operating time of the stethoset receiver is dis-
played on the transmitter (see page 17).
2
1
ON
Receiver status
LED lights up green. The
ON
Using the RS 5000
Transmitter sta-
RS 5000 | 19