8" full range ceiling loudspeaker with dual concentric driver, 6" full range ceiling loudspeaker with dual concentric or ict driver, 5" full range ceiling loudspeaker with dual concentric or ict driver, 4" full range ceiling loudspeaker with dual concentr (69 pages)
Page 2
Recommended torque setting: 2. Cut out the hole in the ceiling tile using a pad 1.5 Nm. Tannoy will not be held responsible for any saw following the broken line indicated on damages caused by the improper installation of the template.
Page 3
Tighten the screws until a firm grip is achieved.(NOTE: Screws have a PoziDriv head; use of a PoziDriv driver is recommended). If using a power driver, Tannoy recommends a torque setting of 1.5 Nm. (Fig.2) DO NOT OVERTIGHTEN! 6.
Page 4
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications. All specifications are subject to change without notice. Copyright (c) 2015 Music Group Innovation SC Ltd. All rights reserved.