Table of Contents
Advertisement
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 41.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display.
4. Remove the nano-SIM-card tray if your computer comes with one. See "Connect to a cellular network
(for selected models)" on page 9.
5. Turn the computer over.
Removal procedure
Installation procedure
Troubleshooting
If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power
adapter and then reconnect it to the computer.
46
P15v Gen 3 and T15p Gen 3 User Guide
Advertisement
Table of Contents
