1. ABOUT 1.2 Package contents 1.1 Product details Product details Boom microphone for fl ip-up & jet helmet Wired microphone for fullface helmet Status led Music/Power Volume + Phone DC Power Charging & Volume – Firmware Upgrade Port Intercom Microphone 2 way connector A) Main unit B) Data/charge cable usb type C...
Installazione degli auricolari 2. HOW TO INSTALL Installing the speakers and the microphone Installation 2.1 Install main unit Use/application with double-sided adhesive in the bracket Installazione del microfono con asticella con filo Installazione del microfono con asticella con filo Installazione del microfono con asticella con filo Use/application with the clamp for main unit...
1 sec 4 sec 1 sec 4 sec 2. With U-COM 6R on, press and hold INTERCOM button for 5 seconds, to Power on Power off enter settings menu. Don’t release the button until the led light is blue. 3. Press once VOLUME + button to start phone pairing mode.
COLLEGAMENTI CONNECTIONS 5 sec 2. With U-COM 6R on, press and hold INTERCOM button for 5 seconds, to Casco pilota Rider’s helmet enter settings menu. Don’t release the button until the led light is blue. 3. Press the VOLUME + button 3 times to activate GPS pairing mode.
5. MOBILE PHONE USAGE 5.2 Siri and Google Assistant U-COM 6R supports the Siri and Google Assistant access directly or press 5.1 Making and Answering Calls Phone the PHONE button once. You can activate the Siri or Google Assistant using the voice through the headset’s microphone, a wake word will be used.
Select one function Confirm selected funcion MP3 players, Motorcycle TFTs etc ...) equipped with the A2DP profile. To play Music music you need to pair these devices to INTERPHONE U-COM 6R. Last number redial Speed dial #1 Speed dial #2...
A and C for 3 seconds until you hear the voice prompt “Intercom pairing”. 7.1 Intercom pairing U-COM 6R can be paired with up to 3 other UCOM units (or Sena units), as shown in the following picture. 3 sec...
Setup 5 sec 3. Press three times to connect the control unit B. Start/stop intercom connection with unit “B” 1. With U-COM 6R on, enter the configuration menu by pressing the Setup Mesh Bluetooth INTERCOM button for 5 seconds. Do not to release the button before the led turns blue.
® 8.1 Function Priority With U-COM 6R on, press and hold INTERCOM button for 5 seconds, to enter settings menu. Don't release the button until the led light is blue. Main phone pairing (to be done with unit on) The headset prioritizes connected devices in the following order: 1.
9.2.1 Speed dial 9.2.5 HD Voice (Default: Enable) Assign phone numbers for speed dialing to make a phone call quickly. HD Voice allows you to communicate in high-definition during phone calls. This feature increases the quality so that the audio will be crisp and clear 9.2.2 VOX Phone (Default: Enable) during phone call conversations.
UCOM16 UCOM6R 5 sec With U-COM 6R on, enter the configuration menu by pressing INTERCOM Second phone pairing (to be done with unit on) button for 5 seconds. Be careful not to release the button before the LED turns blue, you will hear the message confirming activation of the configuration menu.