Assembly Of Machine - Texas A/S Power Split 370 H User Manual

Assembly of machine

Remove all components from the packing case, make sure each log splitter is packed in
one carton and place the components neatly so that they may be identified and checked
for any possible damage during transit. Should any component be found damaged, please
contact your Texas dealer immediately.
520 H
Fig. 1 Display of main components
Check all components with reference to the following list (Fig 1).
520 H
A: Log guiding plates
B: Log pusher
C: Operation handles
D: Wheels, frame and shield
E: Bolt/nuts for fixing the operation handles
F: Motor start switch
G: Motor
H: Supporting legs
I: Main frame
J: Wedge
Wheels and leg assembly
Unpack the log splitter carefully with the
assistance of another person, rest it on the
polyfoam block (packed together with the
machine in a box) on a supported surface.
370 H / 500 H
370 H / 500 H
A: Log guiding plates
B: Log pusher
C: Operation handles
D: Wheels
E: Oil pump
F: Motor start switch
G: Motor
H: Supporting legs
I: Main frame
J: Wedge
Polyfoam block
26