Advertisement
CARE & CLEANING
REMOVABLE FILTER
The Breville Soft Top™ Dual kettle features
a removable mesh filter to remove scale
deposits for cleaner water. To remove the
scale deposits from the filter, open the lid
and slide the filter up and out of the kettle.
The filter can be cleaned by running under
hot water and rubbing with a cleaning cloth
or brush. To replace filter, simply slide the
filter down into the slot behind the spout of
the kettle and push back into position.
NOTE
The filter could become damaged
with time. Please check regularly and
replace if found damaged.
NOTE
The concealed element in the base of
the kettle is made from high quality
stainless steel. Any brown stains
appearing are the result of mineral
deposits and are not rust.
REMOVAL OF MINERAL DEPOSITS
Mineral deposits in tap water may cause
the kettle interior and water gauge to
discolour over time. This may be removed
by using Breville Kettle Cleaner (BKC250)
or a proprietary kettle descaler which is
available from most leading supermarkets,
department and hardware stores.
BREVILLE KETTLE CLEANER
Directions for use:
1.
Add 100ml of Breville Kettle Cleaner
to 1.6 litres of water.
2.
Fill kettle with mixture on a
protected surface.
3.
Bring kettle to boil and let stand for
30 minutes.
4.
Clean spout by using a cloth dampened
with Breville Kettle Cleaner, rub well.
Then wipe off.
5.
Bring the kettle to boil for a second time,
then empty solution.
6.
Fill kettle with fresh water and bring to
the boil, discard boiled water.
Your kettle is now ready to make your next
cup of tea/coffee.
TO CLEAN THE EXTERIOR
The outside of the kettle may be wiped over
with a damp cloth and polished with a soft
dry cloth.
NOTE
Do not use chemicals, alkaline
cleaning agents, steel wool or abrasive
cleaners to clean the inside or outside
of the kettle. Use a mild cleaning
agent with a soft damp cloth.
For a full version of this
Instruction Booklet, download
via www.breville.com
6
6
Advertisement
