Table of Contents
Advertisement
›
Connect to a Wi-Fi AP with a protected setup
You can connect to a secured AP with a WPS button or WPS
PIN. To use this method, your wireless access point must have
a WPS button.
Connect with a WPS button
1
In the application list, select Settings
2
Select an AP that has WPS available, and then select Show
advanced options.
3
Select the WPS drop-down menu.
4
Select Push button
5
Press the WPS button on the AP within 2 minutes.
Connect with a WPS PIN
1
In the application list, select Settings
2
Select an AP that has WPS available, and then select Show
advanced options.
3
Select the WPS drop-down menu.
4
Select PIN from this device
5
On the AP, enter the PIN, and then press the WPS button.
›
Set the static IP settings
1
In the application list, select Settings
2
Select an AP
3
Select the IP settings drop-down menu.
4
Select Static.
5
Change the IP settings.
6
Select Connect.
→
Connect.
→
Show advanced options.
Connectivity
→
→
Connect.
→
→
88
Wi-Fi.
Wi-Fi.
Wi-Fi.
Advertisement
Table of Contents
