Power Requirements; Warranty - EarthQuaker Devices Disaster Transport Manual

FLEXI-SWITCH TECHNOLOGY
®
This device features Flexi-Switch Technology! This relay-based, true bypass switching style
allows you to simultaneously use momentary and latching-style switching.
• For standard latching operation: Tap the footswitch once to activate the effect and then tap
again to bypass.
• For momentary operation: With the effect off, hold the footswitch down for as long as you'd like
to use the effect. Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to pass signal.

POWER REQUIREMENTS

Current Draw .........................35 mA
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We
recommend using a pedal-specific, transformer-isolated, wall-wart power supply or a power
supply with multiple isolated-outputs. Pedals will make extra noise if there is ripple or unclean
power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not
always filter dirty power and may result in unwanted noise.
DO NOT RUN AT HIGHER VOLTAGES!
TECH SPECS
Input Impedance .....................1 MΩ
Output Impedance ...................1 kΩ

WARRANTY

This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any
issues, please visit www.earthquakerdevices.com/support.
6