Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register Your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 TV on Demand 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Ambilight 2 Software 15.1 Ambilight Style...
On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register Your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/TVsupport.
The TV switches itself off for 10 seconds and then back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV Update Software • press twice •...
To open the Sources menu. Quick Guide 5 - Search To open the Smart TV searches page. Remote Control Middle Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control.
Warning Do not put any objects in front of IR sensor of the TV as it may block the IR signal. To open the Netflix App directly. With the TV switched Joystick - Local Control on or from standby. •...
• When you unplug the power cable, always pull the You can also download it plug, never pull the cable. from www.philips.com/TVsupport. Use the model number of the TV to look for the Quick Start Guide to download. Although this TV has a very low standby power...
Page 8
if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On •...
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. Copy protection When you connect a device, the TV recognizes its type and gives each device a correct type name.
Mobile Device Screen Mirroring Using Screen Mirroring Switch on Screen mirroring Press SOURCES > Screen mirroring Share a Screen on TV 1 - Activate Screen mirroring on your mobile device. 2 - On your mobile device, select the TV. (This TV will Digital Audio Out - Optical be displayed as TV model name) 3 - Select the TV name on your mobile device, and,...
Hard Drive with a minimum of 4GB of disk space. favorite app store today. To Record The Philips TV Remote App is available for iOS and Android and is free of charge. To pause and record a broadcast, you need a minimum of 250GB disk space.
When the USB Hard Drive is formatted, leave it connected permanently. Bluetooth What You Need You can connect a wireless device with Bluetooth® to this TV – a wireless speaker or headphones. To play the TV sound on a wireless speaker, you must Warning pair the wireless speaker with the TV.
Page 13
Select a Device To select a wireless device… 1 - Select (Home) > Settings > All settings > Wireless and Networks and press OK. 2 - Select Bluetooth > Search Bluetooth Device and press OK. 3 - In the list, select the wireless device and press OK.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
1 - Select Start now and press OK. 2 - Select Update channels to only add new digital Channels channels. 3 - Select Start and press OK to update channels. This can take a few minutes. Quick reinstall About Channels and Switch ...
Page 16
With Channel list copy, you can copy the channels procedure until you reach the country setting. installed on one TV onto another Philips TV of the Press BACK to cancel the installation.) same range. With Channel list copy, you avoid the If the country is correct continue with step 2.
Audio Language Open Channel List If none of the preferred audio languages are To open the current channel list… available, you can select another audio language if 1 - Press , to switch to TV. available. If no audio languages are available, you 2 - Press OK to open the current channel list.
Search Channels Create a favorites List > OK > OPTIONS > Search channel 1 - While watching a TV channel, press OK to open the channel list. You can search for a channel to find it in a long list of 2 - Select the channel, and press ...
Page 19
in the TV listings. Switch on closed caption 1 - While you watch TV, press OPTIONS. 2 - Select Closed Caption > On and press OK. Select type of closed caption 1 - While you watch TV, press OPTIONS. 2 - Select Caption Service.
Change Day TV guide If the TV guide information comes from the broadcaster, you can press to view the schedule for any of the next few days. Press to go back to the previous day. What You Need Alternatively, you can press ...
Page 21
Set a Recording You can set a recording in the TV Guide. To see the recording list, press Recordings , a program set to be recorded is marked with a (red dot) before the program's name. To record a program… 1 - Press ...
To record a program… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and program you wish to record. Press (Right) or (Left) to Pause TV scroll through the programs of a channel. 3 - With the program highlighted, press the color ...
The recording will appear in the list of scheduled Replay recordings and reminders. Since the TV stores the broadcast you are watching, you can replay the broadcast for a few seconds. Watch a Recording To replay a current broadcast… To watch a recording… 1 - Press ...
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
360 Photo Options Video Options With a 360 photo on-screen, During the video playback, press OPTIONS to… press OPTIONS to… List/Thumbnails List/Thumbnails View video files with list view or thumbnail view. View 360 photos with list view or thumbnail view. Subtitles Shuffle off, Shuffle on Display the subtitles if available, select On, Off,...
on the connected audio system. • Ambilight style* - Select a preset Ambilight style. Open TV Setting • Ambilight+hue* - Switch Ambilight+hue on or off. • Sleep timer - Set the TV to switch to standby Menus automatically after a preset time. •...
Page 27
currently selected picture style, Adjust the picture brightness like Color, Contrast or Sharpness. (Home) > Settings > All Restore a style settings > Picture > Brightness To restore the style to its original setting, go to (Home) > Settings > All Press the arrows ...
Page 28
settings > Picture > Expert mode settings > Press the arrows (up) or (down) to adjust the Whitepoint alignment video contrast level. Customize the whitepoint alignment based on the selected color temperature of the picture. Press the Gamma arrows ...
Page 29
styles to have a better viewing experience. picture vertically or horizontally. (Movie, Sports, Standard, Smooth or Personal) • Undo – select to return to the picture format you started with. Not available for below cases: • (Home) > Settings > All settings > Picture style >...
Page 30
Delta volume Personal Mode Sound Settings (Home) > Settings > All Speaker virtualizer settings > Sound > Advanced > Delta volume (Home) > Settings > All Press the arrows (up) or (down) to adjust the settings > Sound > Personal mode settings > delta value for TV speaker volume.
Page 31
• Stereo (uncompressed): If your audio playback General Settings devices have no multichannel sound processing, select to only output stereo content to your audio Connection Related Settings playback devices. • Multichannel: Select to output multichannel audio Format USB Hard Drive content (compressed multichannel sound signal) or stereo audio content to your audio playback devices.
Page 32
Note: settings > Eco settings > Screen off - EasyLink might not work with devices from other Select Screen off, the TV screen is switched off, to brands. switch the TV screen back on, press any key on the remote control. - The HDMI CEC functionality has different names on different brands.
Page 33
Set to display Feature logos and Promotional banner. Reset TV Settings and Reinstall TV Reset all settings value to original TV settings Demo Me autostart (Home) > Settings > All settings > General (Home) > Settings > All settings > General settings >...
Page 34
PIN code when you try to start an 18+ rated the commentary audio, like stereo or fading sound. app. This lock is only valid for 18+ rated apps from the • Select Speech to set speech Philips apps. preference, Descriptive or Subtitles. Dialog enhancement...
If you have devices in your wireless network that use the WEP To enjoy the full capabilities of your Philips Smart TV, security encryption system, you cannot use WPS. your TV must be connected to the Internet.
(Home) > Settings > All settings > Wireless and networks > Clear Internet Memory and networks > Static IP configuration With Clear Internet Memory you clear your Philips 1 - Select Static IP configuration and configure the server registration and parental rating settings, your connection.
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores.
TV on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programs you missed or watch your favorite programs whenever it suits you best.
> Ambilight > Ambilight style > Follow In this first step, you will prepare the TV to find Color the Philips Hue Bridge. The TV and the Philips Hue Bridge must use the same network. Select one of the preset color styles.
Page 40
2 - Select Start now and press OK. The TV will 1 - Select a bulb to configure and press OK. The search for the Philips Hue Bridge. If the TV is not yet bulb you selected is flashing. connected to your network, the TV will start the 2 - Select Start and press OK.
Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With Amazon Prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TVsupport. 19.2 End of Use...
Wi-Fi Certified This TV supports Wi-Fi certified devices. Performance may vary, depending on the capabilities of the mobile device and the software used. 20.6 Connectivity TV Side • CVBS: CVBS, Audio L/R • USB 2: USB 3.0 • HDMI 3 in: UHD - HDR •...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. switches back to Vivid at startup, the TV is in Shop If the video clip stays black, call Philips. Wait until the location. Set the TV to Home location for use at clip ends and select Contact info in the Help menu.
Picture does not fit the screen / Wrong or unstable 21.7 picture size / Picture position is incorrect HDMI - UHD • If the picture size—its aspect ratio—does not fit the screen, with black bars on the top and bottom or left HDMI and right side of the screen, press ...
21.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work •...
• NEVER place a television in an unstable location. from the power outlet immediately. • NEVER place the television on tall furniture (for Contact Philips TV Consumer Care to have the TV example, cupboards or bookcases) without anchoring checked before use.
Lightning Storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of Hearing Damage Avoid using earphones or headphones at high volumes or for prolonged periods of time.
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warranter in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
24.4 DTS-HD (italics) Copyrights For DTS patents, see http://patents.dts.com. 24.1 Manufactured under license from DTS Licensing HDMI Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. The terms HDMI and HDMI High-Definition in the United States and/or other countries.
It offers functional improvements over sh for both programming and interactive use. Open Source In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 25.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and This television contains open source software.
Page 57
searching utilities of the GNU operating system. iptables (1.4.15) These programs are typically used in conjunction with For Cross connection. other programs to provide modular and powerful Source: http://www.netfilter.org/projects/iptables/ directory search and file locating capabilities to other commands. iputils (s20101006) Source: http://www.gnu.org/software/findutils/ The iputils package is set of small useful utilities for Linux networking.
Page 58
terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/ layers of the system.
Page 59
procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem. which can be found below. The package includes the programs ps, top, vmstat, w, Source: http://www.denx.de kill, free, slabtop, and skill.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Digital Out Leveling 30 Pause TV 23 Digital Out Menu 30 Philips Support 3 Digital Out Offset 30 Philips TV Remote App 11 Dolby Atmos 30 Photos, Videos and Music 24 Dynamic Contrast 28 Picture Clean, Noise Reduction 28 Picture Contrast Mode 28...
Page 62
Picture Format 29 USB Hard Drive Connection 11 Picture Motion Style 28 USB Keyboard Settings 31 Picture Style 26 User Manual 3 Picture, Color 27 Picture, Contrast 27 Video Contrast 28 Picture, Sharpness 27 View Network Settings 36 Problems 48 Viewing Distance 7 Quick Picture Settings 29 Whitepoint Alignment 27...
Need help?
Do you have a question about the 55PU 6794 Series and is the answer not in the manual?
Questions and answers