Date: 2021-01-13
Version: 1.2
5.3
Fitting the oil filter
• Apply Mesamoll to the oil filter seal.
• Fill the oil filter with Mesamoll up to its upper edge.
• Screw the oil filter (19) onto the bracket using the oil filter spanner (93-45), tightening it to
20 to 25 Nm.
Figure 26: Screwing on the oil filter
Item number
(19)
• Start the system and check the correct function of each component.
© 2021 ABB Automation GmbH |
Overhaul instructions
Central lubrication unit
Installation
Designation
Oil filter
Page 41 of 50
en