Tuner Operation - Hyundai MS 132 DU3BL Instruction Manual

TUNER OPERATION

The following buttons are used in tuner mode. Press [FM] to select tuner mode.
ST/MONO
Press to switch between Mono and Stereo reception of the broadcast signal in FM mode.
TUN +: press to fine tune (increase) the frequency;
TUN+/−
TUN −: press to fine tune (decrease) the frequency.
Hold down [TUN +/−] to increase / decrease the frequency continuously.
Hold down to do auto scanning for the broadcasting radio channels and save it
AUTO/STOP
automatically, press it again to stop auto scanning.
After tuning in a new frequency, press [MEMORY] button, then select a preferred station
MEMORY
by inputting the corresponding numbers ,press [MEMORY] button again to save it as a
preset station.
The digit keys can be used to select a preset station.
1 2 3
For example, press [2] to select channel 2; press [10+] first, then press [5] to select
4 5 6
7 8 9
channel 15.
0 10+
Press to skip to the next preset station.
Press to skip to the previous preset station.
NOTE: In Tuner mode, [VOLUME +/−], [MUTE] buttons are also active. For details, please refer
to the introduction of the CD operation in this chapter.
EN - 31
EN