Page 1
(Beschreibung im hinteren Teil dieser Anleitung). Installationsanleitung Installation manual Guide d‘installation Installatievoorschrift Guía de instalación Installationsanvisning Yükleme Rehberi инструкция по установке 安装指南 HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 2
BITTE UNBEDINGT BEACHTEN! | PLEASE NOTE! MONTAGE ZU ZWEIT DURCHFÜHREN. | ASSEMBLY BY TWO PERSONS. HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 3
E | M8x45 | 4x F | M8x55 | 4x G | Untelegscheibe Ø 8 mm | Washer Ø 8 mm | 2x HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 4
Please note! The mount is shipped with the setting for clockwise rotation. For counterclockwise rotation, remove the screw from position (R) to position (L). Caution! Make sure that the alignment is perfectly horizontal (X). HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 5
BEI VERWENDUNG DES FLIP-ADAPTER 65“ BEACHTEN SIE BITTE DEN MONTAGEHINWEIS AUF DER LETZTEN SEITE! WHEN USING THE FLIP-ADAPTER 65“, PLEASE OBSERVE THE MOUNTING INSTRUCTIONS ON THE LAST PAGE! HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 6
Remove the screws and the washers. Assemble the 2 tilting plates (B). Fix them with the screws and the washers. HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 8
Hang up the screen. Please note! Please perform this work stept in pairs. Make sure that the bolts are correctly inserted into the keyholes. Replace the securing brackets and screw them tight. HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 9
Try the rotation several times and make sure the screen is securely locked with the safety brackets (L) If necessary, increase or decrease the force of the spring by adjusting the screw (S). HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 10
Abmessungen | Dimensions VESA VESA VESA HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...
Page 11
Length of the screw depends on der Lochtiefe des TV. the hole depth of the TV. Bitte vorher messen. Please measure in advance. HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de...