HOMEOffice Complete IRIS LED User Manual page 2

Task light

Hide thumbs

page of 2

/ 2
Bookmarks

Lily

Set-up instructions and operation

• Caution

• Do not look directly into the LED lights when lamp is operating.

• Do not direct light at other persons.

• Caution

• Use only the supplied AC power adaptor.

• Do not look directly into the LED lights when lamp is operating.

Caution

• Caution

• Do not hang, clip or tape any object to the lamp.

• Do not direct light at other persons.

• Do not look directly into the LED lights when lamp is operating.

• Do not put this unit near any heat source or under direct sunlight.

• Use only the supplied AC power adaptor.

• Do not direct light at other persons.

• Do not hang, clip or tape any object to the lamp.

• Use only the supplied power adaptor.

• Use only the supplied AC power adaptor.

• Do not put this unit near any heat source or under direct sunlight.

e review these instructions before beginning the installation. Check that the correct components (shown at right) were provided

• Do not hang, clip or tape any object to the lamp.

your order. Do not discard the packaging until the product is assembled and functioning.

• Do not put this unit near any heat source, humid place or under direct sunlight.

• Do not put this unit near any heat source or under direct sunlight.

• For indoor use only.

Please review these instructions before beginning the installation. Check that the correct components (shown at right) were provided

with your order. Do not discard the packaging until the product is assembled and functioning.

Please review these instructions before beginning the installation. Check that the correct components (shown at right) were provided

Please review these instructions before beginning the installation. Check that the correct components (shown below)

with your order. Do not discard the packaging until the product is assembled and functioning.

were provided with your order. Do not discard the packaging until the product is assembled and functioning.

Power adaptor

– or –

Lily-LED

Quick-connect power cord

sition the task light so that no obstructions prevent arm or lamp movement.

ert the power supply jack into the lamp base.

Set-up

ert the power supply plug into an independent power outlet.

1. Position the task light so that no obstructions prevent arm or lamp movement.

Set-up

Do not share an outlet with high power equipment such as printers, copy machines, scanners or computer work stations. This may

2. Insert the power supply jack into the lamp base.

ause the light to ﬂicker.

1. Position the task light so that no obstructions prevent arm or lamp movement.

3. Insert the power supply plug into an independent power outlet.

2. Insert the power supply jack into the lamp base.

—Do not share an outlet with high power equipment such as printers, copy machines, scanners or computer work stations. This may

ration

3. Insert the power supply plug into an independent power outlet.

cause the light to ﬂicker.

—Do not share an outlet with high power equipment such as printers, copy machines, scanners or computer work stations. This may

-Do not share an outlet with high-power equipment such as printers, copy machines, scanners or computer

ss and release the switch to turn the lamp on.

cause the light to ﬂicker.

Operation

work stations. This may cause the light to flicker.

ss the switch the second time the light output will be reduced for 30%.

Lily-LED

Operation

ss the switch one more time and the Lamp will turn o .

Operation

1. Press and release the switch to turn the lamp on.

Lily-LED

ED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

2. Press the switch the second time the light output will be reduced for 30%.

IRIS LED L

n the lamp on just press the switch one time

1. Press and release the switch to turn the lamp on.

3. Press the switch one more time and the Lamp will turn o .

1. Press and release the switch to turn the lamp on.

2. Press the switch the second time the light output will be reduced for 30%.

EDX

LILY LED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

2. Press the switch the second time the light output will be reduced by 30%.

3. Press the switch one more time and the Lamp will turn o .

-LEDX features a continuous dimming option with memory. Press and release the switch to turn the lamp

To turn the lamp on just press the switch one time

3. Press the switch one more time and the lamp will turn off.

LILY LED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

switch to gradually increase to full brightness. Release the switch when the desired level of brightness is reached.

IRIS LED L Light has automatic energy-saving mode, and the lamp will turn off after 12 hours of continuous work.

Lily-LEDX

To turn the lamp on just press the switch one time

ss and release the switch to turn the lamp

. When turned back

To turn the lamp on, press the switch one time.

OFF

1. Lily-LEDX features a continuous dimming option with memory. Press and release the switch to turn the lamp

decrease the intensity level, ﬁrst increase it to full brightness. Then press and hold the switch to dim it to the desired level. To

Lily-LEDX

the switch to gradually increase to full brightness. Release the switch when the desired level of brightness is reached.

IRIS LED LX USB

rease the level again, the lamp ﬁrst must be at its lowest intensity.

1. Lily-LEDX features a continuous dimming option with memory. Press and release the switch to turn the lamp

2. Press and release the switch to turn the lamp

m the light by rotating the arm at the base and the lamp at the top of the arm.

1. IRIS LED LX features a continuous dimming option with memory. Press and release the switch to turn the lamp ON.

the switch to gradually increase to full brightness. Release the switch when the desired level of brightness is reached.

3. To decrease the intensity level, ﬁrst increase it to full brightness. Then press and hold the switch to dim it to the desired level. To

Press and hold the switch to gradually increase to full brightness. Release the button when the desired brightness is reached.

EDX has a USB port that can be used for charging smart phones, tablets and other personal electronics.

2. Press and release the switch to turn the lamp

increase the level again, the lamp ﬁrst must be at its lowest intensity.

2. Press and release the switch to turn the lamp OFF. When turned back ON, the light will illuminate at the previous intensity.

3. To decrease the intensity level, ﬁrst increase it to full brightness. Then press and hold the switch to dim it to the desired level. To

ED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

4. Aim the light by rotating the arm at the base and the lamp at the top of the arm.

3. To decrease the intensity level, first increase it to full brightness. Then press and hold the switch to dim it to the desired level.

increase the level again, the lamp ﬁrst must be at its lowest intensity.

n the lamp on just press the switch one time

Lily-LEDX has a USB port that can be used for charging smart phones, tablets and other personal electronics.

The lamp must first be at its lowest intensity to increase the level again.

4. Aim the light by rotating the arm at the base and the lamp at the top of the arm.

LILY LED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

Lily-LEDX has a USB port that can be used for charging smart phones, tablets and other personal electronics.

IRIS LED LX has a USB port to charge smartphones, tablets, and other personal electronics.

To turn the lamp on just press the switch one time

LILY LED Light has automatic energy saving mode and the lamp will turn o after 6hours of continuous work.

IRIS LED LX Light has automatic energy-saving mode, and the lamp will turn off after 12 hours of continuous work.

To turn the lamp on just press the switch one time

To turn the lamp on, just press the switch one time.

power supply

Lily-LEDX

– or –

Lily-LEDX

– or –

Lily-LED

Lily-LEDX

- or -

IRIS LED L

IRIS LED LX USB

. Then press and hold

, the lamp will illuminate at the previous intensity level.

. When turned back

, the lamp will illuminate at the previous intensity level.

OFF

. When turned back

, the lamp will illuminate at the previous intensity level.

OFF

Page 1

Set-up and operation

Lily

Set-up and operation

Lily

IRIS LED L

power supply jack

Quick-connect power cord

Specifications

Speciﬁcations

• Light: 8W LED Nichia type

• light: 8W LED Nichia type

• CRI: 90

Speciﬁcations

• CRI: >80

• LED Module Lifespan: 90,000 hours

• life: 70,000 hours

Speciﬁcations

• light: 8W LED Nichia type

• Power adaptor: direct plug in with type A

• power adaptor: direct plug in with type A

plug input 100V-240V; output 24V: Power

• CRI: >80

• light: 8W LED Nichia type

adapter 24W

plug input 100V-240V; output 24V

• life: 70,000 hours

• CRI: >80

• Power cord: quick-connect power supply

• power cord: quick connect power supply jack 6F-1.8m

• power adaptor: direct plug in with type A

jack 6F-1.8m

• life: 70,000 hours

• USB output (Lily-LEDX only): DC5V/1A

plug input 100V-240V; output 24V

• USB output (IRIS LED LX only): DC5V/2.4A

• power adaptor: direct plug in with type A

• power cord: quick connect power supply jack 6F-1.8m

• Spring Balanced Arm Movement

plug input 100V-240V; output 24V

• USB output (Lily-LEDX only): DC5V/1A

• Multidirectional Shade

• power cord: quick connect power supply jack 6F-1.8m

• USB output (Lily-LEDX only): DC5V/1A

• ETL Certified

IRIS LED Task Light has an automatic Energy

saving mode that will turn off the Lamp after

12 hours of continuous work.To turn the lamp

on, press the switch one time.

USB Charging Port

. Then press and hold

IRIS LED Task Lighting uses highly efficient LED lighting technology that supports Health & Wellbeing.

Products with LED technology use less energy and last longer than traditional types of lighting.

Sustainable design

Lily-LED

Lily-LEDX

IRIS LED LX USB

switch

ON-OFF

Lily-LED

switch

ON-OFF

switch

ON-OFF

power supply jack

and

ON-OFF

dimming switch

ON-OFF

rotate

dimming switch

rotate

USB port

Page 2

Set-up and operation

Set-up and operatio

Specifications

rotate

Lily-LEDX

shade rotation

Lily-LEDX

rotate

bottom

Quick-connect power cord

power supply jack

of base

power supply jack

bottom

of base

bottom

of base

Felt pad- protection

and

for Desk top finishes

and

ON-OFF

USB port

USB

USB port

This manual is also suitable for:

Iris led lIris led lx usb