Installation; Installing The Leveling Legs - Westinghouse QL059 Owner's Manual

Installation

INSTALLING THE LEVELING LEGS

Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts,
do not proceed with the installation . Report damage and/or missing
parts immediately to the manufacturer . Do not dispose of packaging
before you are satisfied with your new utility sink.
- Remove the utility sink (E) and place it on a soft, protective
surface (Fig . 1) .
- Turn the cabinet (A) upside down onto a protective surface .
- Gently put each leveling leg (D) into its proper location . Using
the four screws provided (J) per leveling leg, attach the leveling
legs (D) to the bottom of the cabinet (A) .
- Gently right the cabinet (A) .
- Using a carpenter's level, turn the base of each leveling leg (D)
until the cabinet (A) is level .
QL059
WARNING:
Always wear safety goggles and gloves during
installation .
CAUTION:
Do not place side load on the leveling legs when
righting the cabinet as they may break .
J
D
A
E
Fig . 1
6