Advertisement
Getting
Please take a moment to review the following details on your new Hypex NCx500 Amplifiers.
What's Included
● Assembled amplifier
● Printed test results
● Power cord
● Allen wrench for front cover
Cabling Requirements
● Balanced XLR-to-XLR or TRS-to-XLR cables are preferred
● For single-ended RCA sources, use the cable configuration in diagram 1 below
● Requires a minimum 13 amp, 3-prong power cord
Started with Your Hypex
NCx500 Amplifiers
Diagram 1. Cable configuration for single-ended RCA sources
Advertisement
Table of Contents
Summary of Contents for Deer Creek Audio Hypex NCx500
- Page 1 Getting Started with Your Hypex NCx500 Amplifiers Please take a moment to review the following details on your new Hypex NCx500 Amplifiers. What's Included ● Assembled amplifier ● Printed test results ● Power cord ● Allen wrench for front cover Cabling Requirements ●...
- Page 2 Break-in period When you first turn on the amplifiers, allow approximately 20 minutes warm-up time before critical listening. After the amplifiers have broken in for several hours, the starting warm-up time should be approximately five minutes. Changing the amplifier gain settings Gain is adjustable with the following jumpers shown on the amplifier board image.
Need help?
Do you have a question about the Hypex NCx500 and is the answer not in the manual?
Questions and answers