Table of Contents
Advertisement
2 Install drives:
• For 3.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive in place.
• For 2.5" drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
3 Insert the loaded drive tray into the empty drive bay and push it into position.
Note:
Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
4 Push the handle inward to secure the drive tray.
5 Insert the drive tray key into the drive tray lock, turn the key clockwise (to the "I" position) to lock the drive tray
handle, and then remove the key.
12 Chapter 2: Hardware Setup
Advertisement
Table of Contents
