GE NEMA User's Manual & Installation Instructions page 66

g
EV Charging Station
9. In the EVSE configuration page modify settings as required.
The correct settings depend on the chosen network architecture and are described in a later
chapter in detail.
There are 3 options for configuration:



After the desired settings were configured click on "Save". The following page will load:
10. Close the browser page and remove power to the EVSE controller.
11. Change the position of the S6 Dip-switch back to:
This Dip-Switch configuration will enable the normal operation of the EVSE controller after powered
up.
GE EV Charging Station User Manual
No RFID Authentication (default)
RFID authentication in standalone network (see later chapter)
RFID authentication in firewalled network (see later chapter)
Figure 64: Configuration Server Confirmation Page
 Switch 8- Closed (Normal operation)
Keep the other switches in their previous positions.
User Manual & Installation Instructions
66 of 86