Eco Settings; General Settings - Philips OLED935 Series User Manual

Advanced Ambilight Settings
Brightness
 Settings > Ambilight > Advanced > Brightness.
Press the arrows  (up) or  (down) to set the
level of Ambilight brightness.
Saturation
 Settings > Ambilight > Advanced > Saturation.
Press the arrows  (up) or  (down) to set the
level of Ambilight saturation.
Ambilight bottom side
 Settings > Ambilight > Advanced > Ambilight
bottom side.
Switch Ambilight bottom side on or off.
Brightness bottom side
 Settings > Ambilight > Advanced > Brightness
bottom side.
If Ambilight bottom side is turned on, press the
arrows  (up) or  (down) to adjust the level of
brightness of Ambilight bottom side.
Neutralise the influence of a coloured wall on the
Ambilight colours
 Settings > Ambilight > Advanced > Wall colour.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they
are intended.
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
 Settings > Ambilight > Advanced > TV switch
off > Fade out to off / Immediately switch off.
 ISF Tuning
 Settings > Ambilight > Advanced >
tuning.
The ISF Calibration expert tunes and locks your
preferred colour for Ambilight. When the ISF
Calibration is done, select  Settings > Ambilight >
Ambilight style > Follow colour >  Warm white /
ISF to use ISF tuning for Ambilight.
14.4

Eco Settings

Set energy saving level
 Settings > Eco settings > Energy saving.
Select Maximum, Medium, or Minimum to have
different degress for energy saving, or select Off to
switch off energy saving mode.
Set screen off to save energy consumption
 Settings > Eco settings > Screen off.
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
 Settings > Eco settings > Light sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Set TV switch off timer
 Settings > Eco settings > Switch off timer.
Press the arrows  (up) or  (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to 0.
 ISF
14.5

General Settings

48