Table of Contents
Advertisement
1
Using your fingernail, drag out the nano SIM card tray.
2
Firmly place the primary SIM card (SIM 1) in the correct orientation in position (1)
as shown in the illustration.
3
Firmly place the additional SIM card (SIM 2) in the correct orientation in position (2)
as shown in the illustration.
4
Insert the memory card in the correct orientation into the memory card slot as
shown in the illustration.
5
Gently push the tray back into the slot until it fits into place.
To remove the nano SIM card
1
Turn off your device.
2
With the screen facing down, open the nano SIM/memory card slot cover.
3
Drag out the nano SIM card tray using your fingernail.
4
Remove the nano SIM card, then gently push the tray back into the slot until it fits
into place.
5
Close the nano SIM/memory card slot cover.
To remove a memory card
1
Turn off your device.
2
With the device facing down, open the nano SIM/memory card slot cover.
3
Gently push in the memory card to release it from its slot. Remove the memory
card and close the nano SIM/memory card slot cover.
Screen Protection
Before using your device, remove the protection film by pulling up on the protruding tab.
Screen covers and protectors may help you to protect your device against damage. We
recommend that you use only those screen covers intended for your Xperia™ device.
The use of third-party screen protection accessories may prevent your device from
working correctly by covering sensors, lenses, speakers, or microphones, and can
invalidate the warranty.
Starting Your Device for the First Time
It is recommended that you charge the battery for at least 30 minutes before starting up
your device for the first time. You can still use your device while it is charging, see
Charging Your Device on page 32.
The first time you start your device, a setup guide helps you to configure basic settings,
personalize your device, and sign in to your accounts, for example a Google™ account.
To Turn On the Device
It is important to use the USB Type-C™ cable (provided) when charging your device as other
types of USB cable can damage your device. It is recommended to charge the battery for at
least 30 minutes before you turn on the device for the first time.
This is an internet version of this publication. © Print only for private use.
8
Advertisement
Table of Contents
