Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Grundig GD-KB-AP0110M
- Page 1 __________________________________________________________________________ User Guide Keyboards GD-KB-AP0110M English __________________________________________________________________________ UG-GD-KB-AP0110M_2018-10-12_V1_EN © Abetechs GmbH...
-
Page 3: Table Of Contents
2. Key Features of the Keyboard 7. Camera Protocol Setup 3. Important Safety Instructions 8. DVR Protocol Setup 4. Package Contents 9. Keyboard Setup in a GRUNDIG DVR 5. Installation 1. Part Names and Functions 6. DVR Control 7. Camera Control 2. -
Page 4: Key Features Of The Keyboard
When installing the product, be cautious to locate it in safe places where children cannot reach it. 6. If the product does not operate properly, please contact the closest GRUNDIG distributor for after sales service. Tampering or disassembling the product will cause expiration of the warranty. -
Page 5: Installation
5. Installation 5.1. Part Names and Functions Top View: English... - Page 6 English...
- Page 7 English...
-
Page 8: System Setup
Rear View: 1) DC12V power port：Power supply connection 2) RS-485 communication port：Camera and/or DVR connection 3) RS-232 communication port：Firmware update or DVR connection 5.2. System Setup The CCTV System Control Keyboard can connect and control various front-end/terminal equipment such as Motordome Cameras, DVRs and Decoders via the RS-485 communication port. -
Page 9: Connection To A Grundig Dvr
Connect a GRUNDIG Recorder directly to the Keyboard by connecting the + and – of the RS-485 port with the corresponding + and – ports of the KB Port of the GRUNDIG DVR. Set the serial settings of the corresponding COM port of the DVR to "Console". -
Page 10: Connection To Dvrs And Motordomes
If the Motordome Camera is connected to the DVR and not directly to the Keyboard, you do not need to setup the protocol and baud rate. The Keyboard will use the GRUNDIG protocol to send the commands to the DVR, which will forward them to the Motordome Camera. -
Page 11: Dvr Protocol Setup
5.8. DVR Protocol Setup Under DVR mode the keyboard is set automatically to the GRUNDIG proprietary DVR protocol that should work straight away. If you need to change the protocol or baudrate of the DVR mode, just enter the administrator mode (the procedure is similar to the one for CAM mode). - Page 12 If the Channel is a Motordome Camera, you will directly access the Pan, Tilt and Zoom functionality of the camera, without switching to CAM mode. To get access to more functionalities, like loading presets and sequences, you will need to switch to CAM mode by pressing the [CAM] button. English...
- Page 13 English...
-
Page 14: Camera Control
Under CAM mode you will be able to access more functions of the Motordome Camera depending of the protocol that is used in the Motordome Camera. With GRUNDIG cameras and the PELCO-D protocol you can load Presets, Sequences, Auto-Pans and Cruises. It is also possible to save Presets, Auto-Pans and Cruises. Of course you can also access the OSD of the camera and do all the configuration of the Motordome Camera from remote. - Page 15 English...
- Page 16 Note: If you have the Motordome Camera connected directly to the Keyboard using the PELCO-D protocol, all of the functions of the above table will work, only the functionalities in the table below are different. English...