Table of Contents
Advertisement
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 20
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start/ Reload .
5.
12.6 Cancelling the pro-
gramme
Press
Start/ Reload .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
12.7 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.8 Switching off the appli-
ance
Turn the programme selector to
▶
Off .
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Open the door.
1.
Remove the fluff from the door.
2.
Remove the two-part fluff filter.
3.
Remove the fluff from the recess.
4.
Ensure that no fluff falls into the air
channel.
operation en
.
31
Advertisement
Table of Contents
