MUTING THE SYSTEM USING BLUETOOTH USING JBL SOUNDSHIFT™ USING JBL CONNECT USING AUDIO FEEDBACK USING VIRTUAL SURROUND USING HARMAN VOLUME ADJUSTING THE BASS SUBWOOFER LEVEL CONTROL SUBWOOFER CROSSOVER CONTROL SUBWOOFER PHASE SWITCH USING YOUR OWN TV REMOTE (TV REMOTE CONTROL LEARNING)
INTRODUCTION Wall Mount Bracket Thank you for purchasing the JBL Cinema SB450. The JBL Cinema SB450 is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes...
Harman Volume (remote control only): Press this button to optical digital output, use the included optical cable to connect it activate Harman Volume. This feature helps to maintain the volume here. level constant and minimizes big variations in volume level when listening to music or watching television.
2) Wireless Pairing Button 3) Crossover 4) Power Input AC 5) Phase Attention: Your JBL CINEMA SB450 comes with subwoofer already paired from the factory, please refer to the subwoofer connection section of this owner’s manual only if you are WALL-MOUNTING THE SOUNDBAR...
HDMI connectors. NOTE: The JBL CINEMA SB450 supports HDCP 2.2 on all its HDMI inputs and output, meaning that you can connect directly any 4K ultra HD source to your soundbar.
Power switch to the “Off” position. Volume Buttons Pairing the Units for Wireless Operation The JBL Cinema SB450 soundbar and wireless subwoofer are automatically “paired” with each other. If the system does not connect right away, press the Wireless Pairing buttons on both units within 30 seconds of each other.
(the button LED will quickly flash blue). Open your Bluetooth settings on your mobile device, then locate and select JBL CINEMA SB450. JBL Connect lets you wirelessly daisy chain two speakers. JBL Connect requires an additional compatible speaker like JBL Flip 3, Test the connection by streaming music from your device to JBL Xtreme, or JBL Pulse 2.
To disable JBL Connect, turn off the second device. experience for anyone sitting in front of and several feet away from the soundbar. Although it is particularly effective when watching movies, you can also try the Harman Display Surround setting for music. Surround Buttons...
LED does not flash, release the button and try again. Press the soundbar top-panel VOLUME UP button Aim the TV remote at the front of the JBL Cinema SB450 and SUBWOOFER PHASE SWITCH slowly press the VOLUME UP button on the TV remote until the Harman Display Surround button flashes white for one This switch determines whether the subwoofer’s piston-like action...
TROUBLESHOOTING If your JBL Cinema SB450 does not perform the way you think it should, check whether the problem is covered in this section before contacting you dealer or a JBL representative. Problems Solutions If the speaker does not turn ON •...
Page 12
The Bluetooth word mark and logos are registered trademarks ® owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International www.jbl.com Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. The terms HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Need help?
Do you have a question about the JBL CINEMA SB450 and is the answer not in the manual?
Questions and answers