Inspecting And Changing Fuses - Honda Odyssey 2021 Owner's Manual

Inspecting and Changing Fuses

Blown
Fuse Box on the Battery
Fuse Puller
Combined Fuse
Blown Fuse
1. Set the power mode to VEHICLE OFF. Turn
headlights and all accessories off.
2. Check the fuses on the battery in the
engine compartment.
If the fuse is blown, have it replaced by a
u
dealer.
3. Remove the fuse box cover.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
5. Check the large fuse in the vehicle interior.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
uuFusesuInspecting and Changing Fuses
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuses with a spare fuse of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 747
There is a fuse puller on the back of the engine
compartment fuse box cover.
753