Download Print this page

Sealey HVF24S.V2 Quick Start Manual page 2

24” industrial high velocity orbital drum fan

Advertisement

3. SPECIFICATION
Model No:........................................................... HVF24S.V2
Current: .........................................................................0.52A
Fan diameter: ................................................... Ø610mm(24")
Maximum Fan Flow Rate (F): ............. 155.3m³/min(5484cfm)
Fan Power Input (P): .................................................. 116.3W
Speeds: ................................................................................ 2
Speed Range: ................................................. 1100-1350rpm
Service Value (SV): ........................................1.34(m³/min)/W
Standby Power Consumption (Psb): ..............................0.0W
Supply: ...........................................................................230V
Fan Sound Power Level (Lwa): ................................ 84 dB(A)
Maximum Air Velocity (c): .........................................3.7m/sec
4. OPERATION
WARNING! Ensure that you read, understand and apply safety instructions in Section 1 before using fan.
4.1.
Check that the speed control is set to "0" (off) and then plug into the mains power supply and switch the power on.
4.2.
The fan features 2 speeds which are selectable using the switch located on the back of the fan.
4.3.
Adjust the direction of the air flow by rotating and tilting the fan up or down as required.
4.4.
When you have finished using the fan ensure you turn the speed control switch to "0" (off) , disconnect the fan from the power supply.
4.4.1.
The fan hangs from the base support (5) on the parts diagram, using the three hanging brackets.
4.4.2.
Select the appropriate fixing from those supplied, and space the three hanging brackets equally along the base support. Hang the fan
and fit the set screws through the brackets to secure the fan.
5. MAINTENANCE
WARNING! Ensure that the fan is disconnected from the mains power supply before attempting any of the following:
5.1.
Use a soft, damp cloth to clean the fan. DO NOT immerse the fan in water and never allow water to drip onto the motor housing. DO
NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
5.2.
To clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a slightly
damp cloth. Replace the grille as required and refit the cross headed screws.
5.3.
Should the motor, switch or the power lead require service or maintenance contact your local Sealey service agent.
5.4.
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof location.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
HVF24S.V2 Issue:3 (2) 21/03/22

Advertisement

loading