Front Suspension Damping
Refer to
Saf ety Precautions
Rebound Damping
FRONT
(1)
(1) damping adjuster
(2) punch mark
(3) reference punch mark
on page
76
.
(3)
(2)
To adjust to the standard position:
1.
Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
2.
Turn the adjuster counterclockwise
approximately
2 1/2
punch mark ( ) on the adjuster aligns
2
with the reference punch mark ( ). This
is the standard position.
3.
Make sure that both fork legs are
adjusted to the same position.
Servicing Your Honda
Suspension
1
turns so that the
3
129