Auxiliary Connection - Bush JT-212 Instruction Manual

Getting to know your CD Radio Boombox
You'll be up and running in no time

Auxiliary connection

Using a 3.5mm audio input connection cable (not included), allows for a quick and easy
connection to an external sound source.
1. Connect one end of a 3.5mm audio connection cable to the headphone or auxiliary
out socket of your secondary device, connect the other end to the Line in socket on
the back of your Boombox.
2. Slide the Power/Mode switch on the back of the Boombox to CD/Aux in.
3. Press the Play button on your external device to start playback through the Boombox
speakers.
4. To gain optimal volume levels, adjust the volume level on both the secondary device
and on the Boombox.
Note: It is recommended that you unplug the audio cable from the Line in socket after
you have finished listening to your external device, as the CD player cannot be used
whilst an audio cable is connected. Please wait for approximately 15 seconds after
unplugging the audio cable, for the Boombox to return to CD mode.
14
Getting to know your CD Radio Boombox
This page is left intentionally blank
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.