Sealey AP890MHV Quick Start Manual page 2

4. ASSEMBLY
2
1
5
12
13
17
NOTE: DO NOT tighten fixings until all parts are correctly aligned.
4.1. CASTOR ASSEMBLY
4.1.1. Using items 9, 10 and 11, fix locking castors (item 8) to one end
of the underside of bottom tray (item 4).
4.1.2. Using items 9, 10 and 11, fix fixed castors (item 7) to other end
of the underside of bottom tray (item 4).
4.2. LEG ASSEMBLY (fig.1)
NOTE: Holes of 26mm pitch centre are to be fitted to outer edge of bottom tray (item 4).
4.2.1. Using items 12 and 13, fix legs (item 5) to outer edge of bottom tray (item 4).
fig.1
4.3. BRACES ASSEMBLY (fig.2)
4.3.1. Using items 12 and 13 fit braces (items 2 and 3) to legs (items 5).
4.3.2. Using items 12 and 13 fit tray (item 18) to brace and leg (item 2 and 5). at locking castor end of unit.
4.4. DRAWER UNIT ASSEMBLY (fig.3)
4.4.1. Fit drawer unit (item 1) into inside of legs. Place corner stiffener (item 14) into the corner and fix stiffener and tray in place using
items 12 and 13.
4.5. ADDITIONAL ATTACHMENTS (fig.4)
4.5.1. Fit lid handle (item 16) to lid using items 17.
4.5.2. Fit side handle (item 6) to frame using items 9 and 13.
4.5.3. Fit gas struts (item 15) between drawer unit and lid using item 11.
© Jack Sealey Limited
3
7
6
10
9
14 15
18
NOTE: Holes of 26mm pitch
centre to be used to fix to tray.
fig.3
Original Language Version
Item Description
1 Drawer Unit
2 Brace (End)
3 Brace (Front)
4
4 Bottom Tray
5 Leg
8
6 Side Handle
7 Castor (Fixed)
8 Castor (Locking)
11
9 Carriage Bolt M8 x 20mm
10 Plain Washer (M8)
16
11 Nut (M8)
12 Carriage Bolt (M8 x 16mm)
13 Flanged Nut (M8)
14 Corner Stiffener
15 Gas Strut
16 Lid Handle
17 Bolt M4 x 6mm
18 Can/Tool Tray
fig.2
fig.4
AP890M/HV Issue 2 (3) 11/08/22