Table of Contents
Advertisement
Quick Links
NGTDSP-H and NGWDSP-H Touch
Screen Display Installation Sheet
Description
The touch screen display audibly alerts and visually displays
system events and voice calls generated by the nurse call
system. The touch screen display can be used as a wall-mounted
device or can be mounted on an articulating pedestal and placed
on a desktop.
Desktop touch screen display (NGTDSP-H)
Wall-mounted touch screen display with handset (NGWDSP-H)
Note: For details on using the display screen, refer to the
Telligence Operation Manual.
Access Panel
The access panel located on the left side of the back of the display
allows users to manually reset the station and manually add and
retrieve data from the device.
Access panel
Mode (Reserved)
Reset Switch
microSD
Memory Card
USB Device Port
The Reset switch restarts the device without changing settings.
The microSD memory card is used to store a device ID that can
enable easy replacement of a failed unit.
The USB device port is used by Ascom Technical Services to capture
system event logs.
© 2016 ascom (US), inc.
ascom
P/N PM000110A
REV 1
•
•
1 of 3
ISS 14OCT2016
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ASCOM NGTDSP-H
Summary of Contents for ASCOM NGTDSP-H
- Page 1 The microSD memory card is used to store a device ID that can enable easy replacement of a failed unit. The USB device port is used by Ascom Technical Services to capture system event logs. Note: For details on using the display screen, refer to the Telligence Operation Manual.
- Page 2 Wall-Mounted Display 4. Connect the handset cord to the TEL connector and then to the jack at the bottom of the handset. Place handset in cradle. Installing the handset cradle for a wall-mounted display Note: When the optional handset is used, connect the handset To install the optional handset accessory (NGHSDSP-A) to the touch cord to the TEL connector, making sure to weave the cord screen display:...
- Page 3 Notes: Installing a supervising dome light with buzzer for supervision 1. All US and Canada installations, require powering from the HC- IPSWITCH8 Power Switch or other E23929 listed PoE Switch. When additional supervision is needed, install a supervising dome light (model HC-CL4-SUPV) near each touch screen display. This 2.
Need help?
Do you have a question about the NGTDSP-H and is the answer not in the manual?
Questions and answers