Starting the Engine
1.
Connect the spark-plug wire to the spark plug.
2.
Open the fuel valve
1. Fuel valve
3.
Firmly push and hold the primer bulb in for 1 second (A of
4.
Hold the blade-control bar in the Run/Shift position, about 5 cm (2 inches) below the handle (B of
Figure
14).
5.
Pull the starter handle lightly until you feel resistance, pull it sharply, then allow it to return slowly to
the rope guide on the handle (C of
Note:
If the engine does not start, repeat steps
(Figure
13).
Figure
14).
Figure 13
Figure
14).
3
through 5.
Figure 14
15
g024303
g239347