Page 2
1. The picture on the left shows the tools required for unpacking & assembling the vehicle as below ① Torque wrench ② No.10-12 wrench ③ No.12-14 wrench ④ 6mm hexagon socket ⑤ 12mm socket ⑥ 21mm socket ⑦ Needle nose pliers ⑧...
Page 3
Quantity Name A Dust cover B Washer C Rear guard retaining M8*16 bolt D Steering wheel bolt M8*30 Steering wheel nut E Engine user’s manual F Nut M14*1.5*H G Cotter Pin 4*28 H Spark plug socket I Rear axle splines 6.Use tool ②...
Page 4
12.Please read the user’s manual(L) completely 11.Put the rear guard to the fram,use tool①④ to and carefully before riding to better understand the tighten (C). Note: performance of the vehicle. (Notice that the red Torque requirement 25-30N.m stop switch on the right side of the steering wheel is off)