Yealink WPP30 - Wireless Presentation Pod Quick Start Guide

Package Contents

Pair the Device to the Endpoint

WPP30 supports RoomCast/MeetingBar series/MeetingEye series/MVC series endpoint.

If you purchase one of above endpoints and WPP30 together, they are already paired. Just connect the WPP30 to your computer for sharing content.
If you purchase the WPP30 separately, you need to pair endpoint and WPP30 manually.

To pair endpoint and WPP30 manually:

1. Connect the WPP30 to the USB-A port on the endpoint.
2. Disconnect the WPP30 after the monitor prompts " Wireless Presentation Pod is Paired successfully ".
   

Start or Stop Sharing Content

1. Connect the WPP30 to the USB-A/USB-C port on your computer.
   Wait Yealink Wireless Presentation Pod software pops up.
   
2. On the WPP30, press the presentation button to share full screen.
   Press the presentation button again to stop sharing.
   

Operating Ambient Temperatures

• Operating temperature: +14 to 122°F (-10 to 50°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Troubleshooting

The unit cannot supply power to Yealink device

There is a bad connection with the plug

1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.

The usage environment is out of operating temperature range

1. Use in the operating temperature range.

The cable between the unit and the Yealink device is connected incorrectly.

1. Connect the cable correctly.

You cannot connect the cable properly

1. You may have connected a wrong Yealink device.
2. Use the correct power supply.

Some dust, etc, may be in the port

1. Clean the port.

Contact your dealer or authorized service facility for any further questions.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Yealink WPP30 - Wireless Presentation Pod Quick Start Guide