Redundant Dc Terminal Block Power Inputs; 12Vdc Dc Jack - GALCO EX95000 Series Quick Start Manual

Connecting to Power
Redundant DC Terminal Block Power Inputs and 12VDC
DC Jack:

Redundant DC Terminal Block Power Inputs

There are two pairs of power inputs can be used to power
up this device. You only need to have one power input
connected to run the switch.
Step 1: Connect the DC power cord to the plug-able terminal block on the
switch, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the switch.

12VDC DC Jack

Step 1: Connect the supplied AC to DC power adapter to the receptacle on
the topside of the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach
the plug into a standard AC outlet with the appropriate AC voltage.
Hardened Ethernet Switch
16