Page 1
Instruction Manual Battery crimping tool Instruction Manual Battery crimping tool EC300/400/S400&EZ300/400/S400 Due to continuing improvements, actual product may differ slightly from the product described here in. Read this material before using this product. Failure to do so can result in serious injury.
SAVE THIS MANUAL LIMITED 1 YEAR WARRANTY Keep this manual for the safety warnings and precautions, assembly, operating, We make every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from inspection, maintenance and cleaning procedures.
PLEASE READ THE FOLLOWING CAREFULLY GENERAL SAFETY RULES THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A READ CARFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE REFERENCE TOOL ONLY.
damages happening, please do not try to repair it by yourself, send it back to the authorized service center as soon as possible. The damaged charger may cause an electric shock accident. The best temperature for charging is between 10℃ - 40℃. Make sure the air hole of the battery and charger are uncovered during charging.
UNDERSTAND YOUR TOOL EC300/400/S400&EZ300/400/S400 is a tool for crimping Cu/Al lugs with cables from 10-300mm to 10-400mm It is powered by Li-ion, actuated by motor and controlled by M C U. With a high pressure hydraulic system, it is a perfect tool to be used in electrical construction site.
2. Description of components: Parts No. Description Function For locking/unlocking the upper die For crimping, interchangeable die Retaining clips For locking/unlocking the down die Limited screw For prevent head from dropping or popping For indicating the operating condition and LED indicator battery discharging situation A white Led light To illuminate the working area...
3. Usage of the tool 3. Function description First you have to check the LED indicator is light or not. If the indicator is light on for more than 5 seconds, it means no power of the battery and should change MCU - automatically detect the pressure during operation and the full powered battery to settle on the tool provide security protect, shut off...
Page 8
In addition we see a lower power weight ratio with 50% more capacity and OPERATING INSTRUCTION shorter charging cycles compare to Ni-MH batteries. Please check carefully before operating. Make sure the tool is complete and has no A Temperature sensor makes the tool stop working automatically damage part.